Viewing The Alarm/Warning Status - Cisco D9858 Installation And Configuration Manual

Viewing the Alarm/Warning Status

From the user interface of the D9858, choose System Settings > Status. The Status
page is displayed.
The Status page displays all the active event messages for the D9858 system. The
Fault Summary area displays the Type of message (alarm or warning) and the
number of alarms and warnings that have an active status ( Number Active).
The following table shows the Alarm/Warning Status table information:
Status
Type
Name
Description
Shows whether it is an alarm or a warning message.
Name of the alarm or warning. For more information on
alarm messages, refer to D9858 Transcoder Alarm Messages
(on page 272).
Configuring System Settings
241