Viewing The Alarm/Warning Status - Cisco D9865 Installation And Operation Manual

Viewing the Alarm/Warning Status

To View the Active Alarm/Warning Status Information
Proceed as follows to view the active alarm and warning messages:
1. From the user interface of the D9865, click System Settings > Alarms > Status.
The Status page is displayed.
2. The Fault Summary section displays the number of currently active Alarms and
Warnings.
3. The Alarm/Warning Status section displays the name of the active alarm/
warning, the alarm/warning message, and the date and time of the alarm. For
more information on alarm messages, refer to Messages, on page 7-2.
4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-53