Cisco ASA 5505 Configuration Manual page 1413

Chapter 64 General VPN Setup
The current release of the security appliance supports one Integrity Server at a time even though the user
Note
interfaces support the configuration of up to five Integrity Servers. If the active Server fails, configure
another Integrity Server on the adaptive security appliance and then reestablish the client VPN session.
Fields
Server IP address—Type the IP address of the Integrity Server. Use dotted decimal notation.
•
Add—Adds a new server IP address to the list of Integrity Servers. This button is active when an
•
address is entered in the Server IP address field.
Delete—Deletes the selected server from the list of Integrity Servers.
•
Move Up—Moves the selected server up in the list of Integrity Servers. This button is available only
•
when there is more than one server in the list.
Move Down—Moves the selected server down in the list of Integrity Servers. This button is
•
available only when there is more than one server in the list.
Server Port—Type the adaptive security appliance port number on which it listens to the active
•
Integrity server. This field is available only if there is at least one server in the list of Integrity
Servers. The default port number is 5054, and it can range from 10 to 10000. This field is only
available when there is a server in the Integrity Server list.
• Interface—Choose the interface adaptive security appliance interface on which it communicates
with the active Integrity Server. This interface name menu is only available when there is a server
in the Integrity Server list.
OL-20339-01
Cisco ASA 5500 Series Configuration Guide using ASDM
Zone Labs Integrity Server
64-103