Load Control Relay; Emergency Engine Starting (Sx600/Mm600) - Yamaha VX600ERG Service Manual

3
4
R
L
Br
2 1
IGNITION SYSTEM

LOAD CONTROL RELAY

1. Inspect:
•
Inspection steps:
•
Disconnect the load control relay from the cou-
pler.
•
Connect the pocket tester (Ω × 1) and battery
(12 V) to the load control relay terminals as
SEA8200
shown.
Positive battery terminal → Brown 1
Negative battery terminal → Brown/White 2
Positive tester probe → Red 3
Negative tester probe → Blue 4
Br/W
•
If load control relay does not have continuity
between the red and blue terminals, replace it.
SEA8210
EMERGENCY ENGINE STARTING
(SX600/MM600)
If a short circuit occurred in the lighting system, the
signal system, or the meter system, the engine can
be started in an emergency by cutting off the load
control relay.
1. Disconnect:
•
2. Start the engine.
SEA8220
8-10
ELEC
Load control relay (with the white coupler) 1
Load control relay (with the white coupler) 1
– +