Qc Pattern - Konica Minolta drypro 832 Service Manual

15.6 QC Pattern

The QC pattern will be displayed according to the value read by the DRYPRO 832 built-in densitometer.
1
Refer to "15.1 DRYPRO 832 Utility Tool Start (Page
window of the DRYPRO 832 Utility Tool.
2
Click the [QC PATTERN] button under "PRINT INFO".
The "QC PATTERN" window is displayed.

QC PATTERN

"
The "QC PATTERN" window contains the following items.
No. Setup Items
1 TRAY SELECT
2 BASE
（STEP1-4）
3 RANGE
（STEP1-4）
4 [RESET] button
5 QC PATTERN
6 [CSV FILE
OUTPUT] button
7 [BACK] button
3
Verify the QC pattern results and output to a file if necessary.
4
Click the [BACK] button.
The "QC PATTERN" window closes, returning to the Maintenance Menu window of DRYPRO 832 Utility Tool.
window
"
Select the desired supply tray.
The reference value from STEP1-STEP4 and the reference value set date/time will
be displayed.
Displays the tolerance range of the reference value.
Resets the reference value.
Up to 60 QC patterns will be displayed, beginning at the most recent.
Values with "OK" results will be shown in blue, while values with "NG" results will
be shown in red.
The QC pattern results will be output as a CSV formatted file.
The "QC PATTERN" window closes, returning to the Maintenance Menu window
of DRYPRO 832 Utility Tool.
Chapter 15 DRYPRO 832 Utility Tool
15-2)", and open the maintenance menu
1
2
3
4
5
6
7
Description of Setting
15-15