Supply Unit; Placing Loading Parts - Konica Minolta drypro 832 Service Manual

Chapter 6 Replacing Lispl-832 (Optional) Loading Parts
6.3

Supply Unit

6.3.1

Placing Loading Parts

The Lispl-832 supply unit includes the following loading parts.
No.
1 Supply elevating motor
2 Elevating plate HP
sensor
3 Tray lock solenoid
4 Tray detection sensor
5 Elevating transport motor
6-4
Name
This motor drives the elevating plate that moves up when transporting film.
Use the same replacement procedure as that for replacing the tray unit.
For more information, see
3)".
This photo sensor detects the position (Home Position) when the elevating
plate is lowered.
Use the same replacement procedure as that for replacing the tray unit.
For more information, see
5-6)".
This solenoid valve locks or unlocks the supply tray in DRYPRO 832.
Use the same replacement procedure as that for replacing the tray unit.
For more information, see
This photo sensor detects presence or absence of the supply tray.
Use the same replacement procedure as that for replacing the tray unit.
For more information, see
15)".
This motor transports film from the Lispl-832.
For more information, see
(Page 6-5)".
Functions and Reference Sections
"5.2 Replacing Supply Elevating Motor (Page 5-
"5.3 Replacing Elevating Plate HP Sensor (Page
"5.4 Replacing Tray Lock Solenoid (Page
"5.5 Replacing Tray Detection Sensor (Page 5-
"6.3.2 Replacing Elevating Transport Motor
5-10)".