Power Supply Unit Intake Air Filter Cleaning - Konica Minolta drypro 832 Service Manual

Chapter 13 Replacing and Cleaning Loading Parts on a Regular Basis

13.6 Power Supply Unit Intake Air Filter Cleaning

Clean the air intake filter in the power supply unit.
Be sure to turn off power and remove the power cable from the electrical outlet before removing
or installing the exterior cover or replacing loading parts.
Caution
Work outline
The number of personnel and the estimated work hours required to replace loading parts is as follows:
Number of Personnel
1
Requirements
The procedure for replacing loading parts requires the following tools:
No.
1 Vacuum cleaner
This is the end of the process of cleaning the power supply unit air intake filter.
13-14
Work Hours
1 minute
Tools No.
1
Remove dust from the outside of the air intake
filter with a vacuum cleaner.
Tools