Lispl-832 (Optional); Structure - Konica Minolta drypro 832 Service Manual

Chapter 2 Before Starting Repair Work
2.1.4

Lispl-832 (optional)

No.
1 Right Cover
2.2

Structure

The structure of DRYPRO 832 is shown below.
Film is fed in the order from No. 1 to No. 5 during the printing process.
However, if the Lispl-832 option is installed and film is loaded into the Lispl-832, film is fed in order from No.7 to
No.2.
No.
1 Supply Unit
2 Justification Unit
3 Exposure Unit
4 Heat Process Unit
5 Cooling Transport Unit
6 Deodorant Filter
7

Lispl-832 (optional)

2-4
1
Name
Name
Picks up film in the supply tray one by one and transports to the justification
unit.
Regulates the horizontal position of the film transported from the supply unit
and transports it to the exposure unit.
Scans laser beam in synchronization with the film transportation and writes
images on the film.
Processes the exposed film by heating.
Cools and discharges the heat processed film.
Removes odors emitted during the heat process. Periodic change is needed.
Picks up film in Lispl-832 one by one and transports to the justification unit.
No. Name
2 Rear Cover
Function
2