Print Condition - Konica Minolta drypro 832 Service Manual

15.3 Print Condition

Set print parameters for each connected diagnostic device.
1
Refer to "15.1 DRYPRO 832 Utility Tool Start (Page
window of the DRYPRO 832 Utility Tool.
2
Click the [PRINT CONDITION] button under "PRINT INFO".
The "PRINT CONDITION" window appears.
"PRINT CONDITION" window
1
2
3
4
5
6
7
8
9
The "PRINT CONDITION" window contains the following setup items:
No. Setup Items
1 MANAGE INFO.
PRINT
2 REQUESTED
IMAGE SIZE
Description of Setting
Specify whether or not to print film management information on the upper part of
the film.
Default value: ON
ON Film management information is printed.
OFF Film management information is not printed.
Set the operation when image size is specified from the diagnostic device.
Default value: ON
ON Print in the specified size.
OFF Print ignoring the specified size.
[Caution]:
If the image size specified from the diagnostic device exceeds the film size,
scale the image down and print.
The reduction ratio can be printed as stamp information by setting the
"REQUESTED IMAGE SIZE STAMP".
Chapter 15 DRYPRO 832 Utility Tool
15-2)", and open the maintenance menu
10
15-9