Chapter 7 Replacing Sub Scan Unit Loading Parts; Placing Loading Parts - Konica Minolta drypro 832 Service Manual
Laser imager
Hide thumbs
Also See for drypro 832:
- Manual (84 pages) ,
- Operation manual (84 pages) ,
- Quick manual (4 pages)
Table of Contents
Advertisement
Chapter 7 Replacing Sub Scan Unit Loading Parts
7.1
Placing Loading Parts
Sub Scan Unit
The sub scan unit includes the following loading parts.
No.
1
Right cover detection
sensor
2
Position regulation inlet
sensor
3
Position regulation
transport motor
4
Moderation belt
5
Transfer belt
6
Sub Scan transport motor This drive motor is used to transport film in the sub scan unit.
7
Sub Scan nip motor
8
Sub Scan inlet sensor
9
Sub Scan nip HP
sensor
10
V-sync sensor
7-2
Name
This photo sensor detects the opening/closing of the right cover.
For more information, see
(Page
7-12)".
This photo sensor detects film transportation at the inlet of the justification
unit.
For more information, see
(Page
7-15)".
This drive motor is used to transport film in the justification unit.
For more information, see
Motor (Page
This rubber belt transfers drive of the transport motor to the inlet roller.
For more information, see
This steel belt transfers drive of the inlet roller to the outlet roller.
For more information, see
For more information, see
7-27)".
This motor drives the nip in the sub scan unit.
For more information, see
30)".
This photo sensor detects film transportation at the inlet of the sub scan unit.
For more information, see
34)".
This photo sensor detects the home position of the nip in the sub scan unit.
For more information, see
7-38)".
This photo sensor detects film transportation in the sub scan unit.
For more information, see
Functions and Reference Sections
"7.4 Replacing Right Cover Detection Sensor
"7.5 Replacing Position Regulation Inlet Sensor
"7.6 Replacing Position Regulation Transport
7-19)".
"7.7 Replacing Moderation belt (Page
"7.8 Replacing Transfer belt (Page
"7.9 Replacing Sub Scan Transport Motor (Page
"7.10 Replacing Sub Scan Nip Motor (Page 7-
"7.11 Replacing Sub Scan Inlet Sensor (Page 7-
"7.12 Replacing Sub Scan Nip HP Sensor (Page
"7.13 Replacing V-sync Sensor (Page
7-23)".
7-25)".
7-40)".
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
