14.3 Checking and Fine Tuning the Print Size
If there is variation between the Main Scan OFFSET and Sub Scan OFFSET, you can adjust in the "PRODUCT
SETUP" window of DRYPRO 832 Utility Tool.
14.3.1 Checking Print Size
Print a FRAME pattern, and check the size.
1
Start DRYPRO 832 Utility Tool with reference to
2)".
The Maintenance Menu window appears.
2
Click the [TEST PRINT] button under "PRINT INFO.".
The "TEST PRINT" window appears.
3
Select "FRAME" from "PRINT TYPE".
The "FRAME" pallet appears.
4
Select the tray from which you want to print the frame pattern from the "TRAY SELECT"
dropdown list and specify "DENSITY" and "COPY COUNT".
5
Click the [PRINT] button.
The FRAME pattern is printed from the selected tray.
Chapter 14 Setting and Adjustment
"15.1 DRYPRO 832 Utility Tool Start (Page 15-
14-17