16.7 Collecting Logs
Collect and load DRYPRO 832 and Printlink5-IN logs into service PC.
Collect the appropriate log in the following procedure when there is a problem with DRYPRO 832, Printlink5-IN, or
MainteTool.
1
Connect the service PC to the facility's network with reference to
(Page
16-3)".
2
Refer to
"16.3 How to Start the MainteTool (Page 16-9)"
The MainteTool menu window appears.
3
Click the [LOG] button.
The window in which you can select the period and device to collect LOG is displayed.
4
Enter the time when collection of logs starts in the "FROM" entry field and the time when
collection of logs ends in the "TO" entry field.
5
Place a checkmark in the box of the device to collect logs under "Select Target".
6
Click the [OK] button.
If the version of software for DRYPRO 832 is up to V1.01
If the version of software for DRYPRO 832 is V1.02 or later
Chapter 16 MainteTool
"16.2 Setting up Network
and start the MainteTool.
16-33