Konica Minolta drypro 832 Service Manual page 324

Chapter 15 DRYPRO 832 Utility Tool
14
If Lispl-832 is installed, perform calibration on another tray.
•
If the tray selected in
•
If the tray selected in
Note
This completes the process of calibrating the densitometer.
Continue to "15.20.2 Confirming After Density Calibration (Page 15-49)"
calibrated.
15-48
Step 4 comes first, perform calibration on Tray 2.
Step 4 comes second, perform calibration on Tray 1.
and confirm after the density has been