Controlling Snmp Access; Disabling Snmp Access - Paradyne 9126 User Manual

Controlling SNMP Access

The FrameSaver unit supports SNMP Version 1, which provides limited security
through the use of community names. There are three methods for limiting SNMP
access:
T
T
T

Disabling SNMP Access

When the SNMP access is disabled, the FrameSaver unit will not respond to
SNMP messages.
Procedure
To disable SNMP access:
See
Options, for more information about General SNMP Management configuration
options.
9128-A2-GB20-80
Disabling SNMP access.
Assigning SNMP community names and the access type.
Assigning IP addresses of those NMSs that can access the unit.
1. Select the General SNMP Management options.
Main Menu Configuration
General SNMP Management
2. Disable the SNMP Management option.
3. Save your change.
Configuring General SNMP Management
September 2002
6. Security and Logins
Management and Communication
in Chapter 4, Configuration
6-9