Paradyne 9126 User Manual page 149

4. Configuration Options
Table 4-26. Auto Backup Criteria Options (2 of 2)
When Auto Backup Allowed
Possible Settings: Always, Restrict
Default Setting: Always
Determines when backup for the access unit is allowed to occur.
Always – No restrictions on backup.
Restrict – Backup is restricted to the day and time selected in the following configuration
options. Use this selection when the importance of the data that you are backing up is
day/time dependent.
Backup Allowed: Day From nn:nn
Possible Settings: 00:00 – 23:00, None
Default Setting: 00:00
Specifies the time that Auto Backup can begin for a selected day of the week in
increments of 1 hour. Day is Monday through Sunday.
00:00 – 23:00 – Specifies the time of day that Auto Backup will start for this particular day.
None – Auto Backup cannot occur on this day.
Backup Allowed: Day To nn:nn
Possible Settings: 00:00 – 24:00
Default Setting: 24:00
Specifies the time that Auto Backup must end occurring for the selected day of the week in
increments of 1 hour.
Display Conditions – This option only appears if a start time was specified.
00:00 – 24:00 – Specifies the time of day that Auto Backup will stop for this particular day.
4-105
9128-A2-GB20-80 September 2002