H Controlling Snmp Access; Disabling Snmp Access - Paradyne FrameSaver SLV 9124 Technical Reference

Security
Controlling SNMP Access

Disabling SNMP Access

"
9-6
The FrameSaver unit supports SNMP Version 1, which only provides limited
security through the use of community names. There are three methods for
limiting SNMP access:
H
Disabling SNMP access.
H
Assigning SNMP community names and access type.
H
Assigning IP addresses of NMSs that can access the FrameSaver unit.
The General SNMP Options screen provides the configuration option to disable
SNMP access to the unit. When this configuration option is disabled, the
FrameSaver unit will not respond to any SNMP messages.
Procedure
To disable SNMP access:
1. Follow this menu selection sequence:
Main Menu → Configuration → Management and Communication →
General SNMP Management
The General SNMP Options screen appears.
2. Set SNMP Management to Disable.
3. Save your changes.
See Configuring SNMP Management
more information about General SNMP Management configuration options.
June 1999 - Preliminary
in Chapter 8, Configuration Options, for
9124-A2-GH30-00