Paradyne 9126 User Manual page 99

Procedure
DSX-1 Signaling Assignments and Trunk Conditioning (Page 2)
The second page of the DSX-1 to Network Assignments screen allows you to
define the signaling assignments and trunk conditioning for each time slot on the
DSX-1 interface. You can specify whether robbed bit signaling information is being
passed within a given DS0, and the value of the signaling bits that will be
transmitted for that DS0 to the other cross-connected T1 network interface if a
Carrier Group Alarm (CGA) occurs on a T1 network interface.
DSX-1 to Network Time Slot Assignment Screen Example (Page 2)
For easy movement between screens, select the FrAssign function key to go
directly to the Frame Relay Network Assignments screen or the DSXAssign
function key to go to the DSX-1 to Network Assignments screen.
9128-A2-GB20-80
1. Follow this menu selection sequence:
Configuration Time Slot Assignment
The DSX-1 to Network Assignments screen appears. This screen contains a
matrix of the current cross-connect status of all time slots on the network
interface.
2. Move the cursor to the next time slot that can be edited (underlined). Use the
spacebar or type in the desired time slot to display its time slot assignment.
3. Repeat Step 2 until all desired time slots are assigned.
4. Save the configuration.
main/config/tslot_assign/dsx
Device Name: Node A
DSX-1 TO NETWORK 1 ASSIGNMENTS
SIGNALING AND TRUNK CONDITIONING
Network 1 Side DSX-1 Side
Net1/01 E&M-busy - DSX-1/01 E&M-busy
Net1/03 E&M-busy - DSX-1/03 E&M-busy
Net1/09 None - DSX-1/09 None
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save PgDn PgUp
September 2002
DSX-to-Network Assignments
Network 1 Side
Net1/02 E&M-busy
Net1/04 E&M-busy
Net1/10 None
ClearAll
4. Configuration Options
9128-II
5/26/2000 23:32
Page 2 of 2
DSX-1 Side
- DSX-1/01 E&M-busy
- DSX-1/04 E&M-busy
- DSX-1/10 None
MainMenu Exit
VocAssign FrAssign
4-55