Paradyne 9126 User Manual page 225

Paradyne router user's guide
Table of Contents

Advertisement

Table 7-14. Most Recent and Previous Cause Value Messages (2 of 6)
9128-A2-GB20-80
Cause
Message
No.
Facility Rejected
29
Incoming Calls
54
Barred
Incompatible
88
Destination
Identified Channel
82
Does Not Exist
Info Element
99
Nonexistent or
Nonimplemented
Interworking,
127
Unspecified
Invalid Call
81
Reference Value
Invalid Info Element
100
Contents
Invalid Message,
95
Unspecified
Invalid Number
28
Format – Incomplete
Address
September 2002
What It Indicates
Requested facility is not
provided by the network.
Called user is not permitted
to accept the call.
Request to establish a call
has been received, but
low-layer, high-layer, or
another compatibility
attribute (e.g., data rate)
cannot be provided.
Incorrect format of the
destination link.
Channel requested for a call
is not activated on the
interface.
Device sending this cause
has received a message it
does not recognize.
This cause will not prevent
the message from being
precessed.
Precise cause of a
message cannot be
determined because the
interworking network does
not provide causes.
Call reference used is not
currently in use on the
user-network interface.
Device sending this cause
has received and
implemented an information
element, but one or more
fields in the element cannot
be processed.
No other cause in the
invalid message class
applies for this invalid
message event.
Call cannot be completed
because the phone number
is incorrect or incomplete.
7. Operation and Maintenance
What To Do
No action is needed.
Turn off network call
screening.
Arrange for the desired
capability.
Make sure the network is
configured for 2B service, if
a BRI DBM. Contact your
service provider to verify
that your service is
provisioned for two
B-channels.
1. Verify that the Inbound
Calling ID has been
defined.
2. Verify that the Inbound
Calling ID is part of your
service.
No action is needed.
Contact your service
representative.
Contact your service
representative.
Contact your service
representative.
Check your ISDN link
profile, and correct the
number.
7-43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents