Paradyne 9126 User Manual page 43

Changing Configuration Options
Procedure
To change configuration option settings:
9128-A2-GB20-80
1. From the Configuration Edit/Display menu, select a set of configuration
options and press Enter.
For example:
Configuration PVC Connections
2. Select the configuration options that are applicable to your network, and make
appropriate changes to the setting(s). See
Basic Operation
, for additional information.
When creating new PVC connections or management PVCs, some
configuration options will be blank. For a valid setting to appear, Tab to the
configuration option and press the spacebar.
3. Repeat Steps 1 and 2 until all changes are complete.
NOTES:
— Only Security Access Level 1 users can change configuration options.
— Security Access Level 2 users can only view configuration options and run
tests.
— Security Access Level 3 users can only view configuration options; they
cannot change configuration options or run tests.
September 2002
3. Configuration Procedures
Chapter 2, User Interface and
3-5