Paradyne 9126 User Manual page 227

Table 7-14. Most Recent and Previous Cause Value Messages (4 of 6)
9128-A2-GB20-80
Cause
Message No.
Normal Call 16
Clearing
Normal, Unspecified 31
No User 18
Responding
Number Changed 22
Only Restricted 70
Bearer Capability
Available
Outgoing Calls 52
Barred
Pre-empted 45
Protocol Error, 111
Unspecified
Quality of Service 49
Unavailable
Recovery of Timer 102
Expired
September 2002
What It Indicates
Call is being cleared
because either the caller or
receiver has requested that
it be cleared.
Remote user has sent a
release message to the
network.
No other cause in the
normal class applies for this
normal event.
Called device does not
respond to the call with an
alert or connect indication
within the prescribed period
of time.
Internal network timers may
be a cause.
Called number is no longer
assigned.
An unrestricted bearer
service has been
requested, but the device
sending the cause only
supports the restricted
version.
Network is using Call
Screening.
Call has been pre-empted.
No other cause in the
protocol error class applies
for this protocol error event.
Requested Quality of
Service requested cannot
be provided (e.g.,
throughput cannot be
supported).
Error-handling procedure
has been initiated as a
result of the expiration of a
timer.
7. Operation and Maintenance
What To Do
No action is needed.
No action is needed.
Contact the network
provider if the cause
continues.
Look in the diagnostic field
for the new number, then
change the phone number
in your ISDN link profile.
Arrange for the desired
capability.
Contact the network
provider to turn Call
Screening off.
Contact the network
provider.
Contact your service
representative.
No action is needed.
Retry the call.
7-45