Paradyne 9126 User Manual page 221

Table 7-13. DBM Interface Status (1 of 3)
9128-A2-GB20-80
Field Status
Line Status
Active
Disabled
Inactive
Invalid SPID
Invalid Local Number
Call Rejected – Invalid
ID: Caller ID
Call Rejected – No
Far-End ID
Call Rejected – ISDN
Link Name: Busy
1
Only appears for a constituent frame relay link.
2
If Link Operating Mode is Disabled or Idle, the Remote Call ID, ISDN Channel, and
Negotiated Rate fields will not appear.
3
Appears for frame relay links with only one constituent and for all constituent frame
relay links.
September 2002
7. Operation and Maintenance
What It Indicates
The overall status of the ISDN line.
T
The ISDN line is active and no
error conditions exist.
T
The ISDN interface has been
disabled.
Main Menu Configuration
ISDN Physical
T
The ISDN line is disconnected or
an ISDN network alarm condition
exists.
T
The switch has rejected one of
the configured SPIDs
(ISDN BRI DBM only) .
T
The phone number configured for
a B-channel is an invalid local
number.
T
The incoming call was rejected
because the Caller ID or local
phone number received from the
switch did not match any
configured Link Profiles.
If provided by the switch, the
rejected Caller ID is displayed
after the status. Otherwise,
Invalid Call ID is displayed.
T
The incoming call was rejected
because no Caller ID was
received from the switch (COM
port's Port Use option is set to
Caller ID).
T
No local phone number was
received from the far-end device
during the call validation process
(COM port's Port Use option is
set to Proprietary).
T
The incoming call was rejected
because the enabled ISDN Link
Name associated with the
incoming Caller1 ID or local
phone number was busy.
The ISDN Link Name associated
with the incoming call is
displayed.
7-39