Paradyne 9126 User Manual page 223

Table 7-13. DBM Interface Status (3 of 3)
9128-A2-GB20-80
Field Status
Call Status Connected – Outbound
Call
(continued)
Most Recent Cause Various ITU cause
3
Value messages
Previous Cause
3
Values
Maximum Link Rate BRI DBM:
(Kbps)
PRI DBM:
Negotiated Rate 64K per B-channel
(Kbps) 56K per B-channel
ISDN Channel BRI DBM:
PRI DBM:
3
Remote Call ID None
Remote device's ID
1
Only appears for a constituent frame relay link.
2
If Link Operating Mode is Disabled or Idle, the Remote Call ID, ISDN Channel, and
Negotiated Rate fields will not appear.
3
Appears for frame relay links with only one constituent and for all constituent frame
relay links.
September 2002
What It Indicates
T
1
Refer to
and Previous Cause Value
Messages, for additional information.
The maximum link rate that was
64K, 128K configured for the selected link. This
is the maximum rate the link will
attempt to achieve when activated.
64K, 128K, . . . 1472
The negotiated rate of the
connection/link.
For a multilink aggregate frame relay
link, the negotiated rate will be the
sum of the negotiated rates on all
connected constituent links.
The ISDN B-channel being used for
B1, B2 the call on this link.
B1, B2, . . . B23
Backup has never been active on
the link.
Remote call origination – Last
Calling ID of the remote backup
device received for the B-channel. If
the remote device initiated the call,
this is the Inbound Call ID. If this
device originated the call, this is the
Outbound Phone Number.
7. Operation and Maintenance
An outbound call has been placed
and is actively connected and
available for data transfer on the
selected multilink constituent link
(when the Most Recent Cause
Value is Call Awarded and
Being Delivered In Est
Chnl-7).
Table 7-14, Most Recent
7-41