Paradyne 9126 User Manual page 363

Table B-7.
9128-A2-GB20-80
enterprise-Specific Traps and Variable-Bindings (3 of 3)
Trap Variable-Bindings
T
enterpriseSecondary-
ClockFail(4)
enterpriseSecondary-
ClockFailClear(104)
T
enterpriseSelfTest-
Fail(2)
enterpriseTest- For physical interfaces and
Start(5) frame relay links:
T
T
T
enterpriseTest-
For virtual circuits (DLCIs):
Stop(105)
T
T
T
September 2002
B. SNMP MIBs and Traps, and RMON Alarm Defaults
Possible Cause
devLastTrapString Operating software has detected
(devHealthAndStatus.- that the secondary clock source
mib) has failed.
String:
'Secondary clock failed.'
Operating software has detected
that the secondary clock source is
operational again.
String:
'Secondary clock restored.'
devLastTrapString Unit has completed
(devHealthAndStatus.- (re)initialization and a hardware
mib) failure was detected.
String:
'Self test failed: $ s .' ($ s is the
contents of devSelfTestResult.)
At least one test has been started
on an interface or virtual circuit.
ifIndex (RFC 1573) String:
'$testString test started on
.0.0 (placeholder)
$ifString.' (e.g., 'DTE Loopback
test started on Sync Data Port
devLastTrapString
S01P1.')
(devHealthAndStatus.-
mib
All tests have been halted on an
interface or virtual circuit.
devFrExtDlciIfIndex
String:
(devFrExt.mib)
'$testString test stopped on
$ifString.' (e.g., 'Disruptive PVC
devFrExtDlciDlci
Loopback test stopped on DLCI
(devFrExt.mib)
100 of Sync Data Port S01P1
frame relay.')
devLastTrapString
(devHealthAndStatus.-
mib
B-15