Paradyne 9126 User Manual page 196

7. Operation and Maintenance
Table 7-6.
7-14
Device Messages (3 of 6)
Message What It Indicates
Invalid Password Login is required and an
incorrect password was
entered; access is denied.
Invalid Test A conflicting loopback or
Combination pattern test was in progress
when Start was selected to
start another test, or was
active on the same or
another interface when
Start was selected.
Limit of six Login IDs An attempt to enter a new
reached login ID was made, and the
limit of six login/password
combinations has been
reached.
Limit of Mgmt PVCs New was selected from the
reached PVC Connection Table and
the maximum number of
management PVCs has
already been created.
Limit of PVC New was selected from the
Connections reached PVC Connection Table and
the maximum number of
PVCs has already been
created.
Name Must be Unique Name entered for a
management PVC has
been used previously.
No Destination Link New was selected from the
DLCIs Available PVC Connection Table, but
even though DLCIs are
available to form a
connection, no DLCIs are
available on the network
link, which is a suitable PVC
Destination.
No DLCIs available for New was selected from the
connection PVC Connection Table, but
all configured DLCIs have
been connected.
New was selected from the
Management PVCs option
screen, but all Link/DLCI
pairs have been connected.
September 2002
What To Do
T
Try again.
T
Contact your system
administrator to verify your
password.
T
Wait until other test ends and
message clears.
T
Cancel all tests from the Test
screen (Path: main/ test).
T
Stop the test from the same
screen the test was started
from.
T
Delete another login/password
combination.
T
Reenter the new login ID.
T
Do not create the management
PVC.
T
Delete another management
PVC, and try again.
T
Do not create the PVC
connection.
T
Delete another PVC
connection, and try again.
Enter another 4-character name
for the logical/management link.
Configure additional DLCIs for the
network link and try again.
No action needed, or configure
more DLCIs and try again.
Configure more network and/or
Port-1 Links/DLCIs pairs and try
again.
9128-A2-GB20-80