Paradyne 9126 User Manual page 228

7. Operation and Maintenance
Table 7-14. Most Recent and Previous Cause Value Messages (5 of 6)
7-46
Cause
Message No.
Requested Channel 44
Not Available
Requested Facility 69
Not Implemented
Requested Facility 50
Not Subscribed
Resource 47
Unavailable,
Unspecified
Response to 30
STATus ENQuiry
Service/Option Not 79
Implemented
Service/Option 63
Unavailable,
Unspecified
Switching 42
Equipment
Congestion
Suspended Call 83
Exists, But Not Call
ID
Temporary Failure 41
September 2002
What It Indicates
Circuit or channel
requested cannot be
provided by the other side
of the interface.
Supplemental service
requested is not supported
by this device.
The supplementary service
requested cannot be
provided by the network
until user completes
arrangement with its
supporting networks.
No other cause in the
resource unavailable class
applies for this resource
unavailable event.
Status enquiry message
received, generating this
message.
No other cause in the
service or option not
available class applies for
this not implemented event.
No other cause in the
service or option not
available class applies for
this not available event.
Switching equipment
sending the cause is
experiencing heavy traffic.
A call resume has been
attempted, but no
suspended call exists for
this phone number.
Network is not functioning
correctly, but the condition
is not expected to continue
for long.
What To Do
Allow the DBM to
automatically call using the
alternate link if Auto Backup
is enabled, or manually
select an alternate path for
the call.
No action is needed.
Arrange for the desired
capability.
No action is needed.
No action is needed.
No action is needed.
Wait and try again.
Wait and try again.
1. Verify the number in the
Inbound Calling ID #
field for the suspended
call.
2. Reissue the Call
Resume command using
the correct number.
Wait and try again.
9128-A2-GB20-80