Paradyne 9126 User Manual page 126

4. Configuration Options
Table 4-18. Management PVC Options (6 of 6)
4-82
Encapsulation
Possible Settings: Routed
Default Setting: Routed
This read-only field specifies that the IP encapsulation used is RFC 1490/RFC 2427
routed Network Level Protocol IDentifier (NLPID) encapsulation, and not SubNetwork
Access Protocol (SNAP) encapsulation.
Display Conditions – This option appears only if the PVC is IP Enabled or Payload
Managed is enabled.
Routed – IP encapsulation is routed NLPID.
September 2002 9128-A2-GB20-80