Paradyne 9126 User Manual page 195

Table 7-6.
9128-A2-GB20-80
Device Messages (2 of 6)
Message What It Indicates
Duplicate DLCI DLCI number entered is not
Number unique for the frame relay
link.
File Transfer Complete A file transfer was
performed successfully.
(Seen at an FTP
terminal.)
File Transfer Failed – A file transfer was
Invalid file attempted, but it was not
successful.
(Seen at an FTP
terminal.)
Invalid – Already A test was already in
Active progress when it was
selected.
Invalid Character ( x ) A non-valid printable ASCII
character has been
entered.
Invalid date: must be A non-valid date was
mm/dd/yyyy entered on the System
Information screen.
Invalid date and/or A non-valid date or time
time was entered on the System
Information screen. The
date does not exist (e.g.,
February 30th).
Invalid – Link Already Start was selected for a
Active Test Call, but the selected
frame relay link is currently
in use.
Invalid – No ISDN Start was selected for a
Channels Available Test Call, but all supported
ISDN channels are
currently in use.
Invalid – No Test Call Stop was selected for a Test
Active Call and no test call is
active on the selected link.
This can occur when the
test is ended because the
link is needed for an active
connection, but the PVC
Test screen has not yet
been updated to Start.
Invalid time: must be A non-valid system time
hh:mm:ss was entered on the System
Information screen.
September 2002
7. Operation and Maintenance
What To Do
No action needed; previous
contents of the DLCI number field
is restored.
Switch to the newly downloaded
software.
See Changing Software on
page 7-79.
T
Try again, making sure you
type the filename correctly.
T
Exit the FTP session, or
download another file.
See Changing Software on
page 7-79.
No action needed.
Reenter information using valid
characters.
Reenter the date in the
month/day/4-digit year format.
Reenter the date in the
month/day/4-digit year format
and/or time in the
hour:minutes:seconds format.
Wait until the link is available and
try again.
Wait until a channel is available
and try again.
Start the Test Call again when the
connection is Inactive again.
Reenter the time in the
hour:minutes:seconds format.
7-13