10. Setting Up NetScout Manager Plus for FrameSaver Devices
Refer to Editing Alarms in the NetScout Manager/Plus & NetScout Server
Administrator Guide to change alarm thresholds.
10-10
4. Edit any trap defaults that may be required. See
Adding SLV Alarms Manually for field settings you may want to change.
5. Select the OK button (at the bottom of the screen) to apply your changes. The
window closes and the Configuration Manager main window reappears.
6. Select the Install button (down the center of the Configuration Manager main
window) to apply your changes.
September 2002
Step 4
on page 10-12 of
9128-A2-GB20-80