Paradyne 9126 User Manual page 111

Table 4-14. DLCI Record Options (4 of 4)
9128-A2-GB20-80
Backup Group
Possible Settings: A, B, C, . . . Z, None
Default Setting: None
Assigns DLCIs to a backup group so backup does not take place unless all DLCIs in the
group are no longer operational or latency has been exceeded. Backup is terminated
when one DLCI in the group is operational again. This feature reduces backup charges
when redundant PVCs have been configured.
Display Conditions – This option is not available on a user data port, a virtual router
port, or an ISDN DBM interface.
A – Z – Specifies the designation for this group of DLCIs. Only DLCIs in a PVC will be
considered part of a Backup Group.
None – No Backup Groups have been set up.
September 2002
4. Configuration Options
4-67