Paradyne 9126 User Manual page 226

7. Operation and Maintenance
Table 7-14. Most Recent and Previous Cause Value Messages (3 of 6)
7-44
Cause
Message No.
Invalid Transit 91
Network Selection
Mandatory 96
Information Element
Missing
Message Not 101
Compatible with Call
State
Msg Nonexistent 98
Msg Type 97
Nonexistent or
Unimplemented
Network Out of 38
Order
No Call Suspended 85
No Circuit/Channel 34
Available
No Destination 3
Route
None —
Non-selected User 26
Clearing
No Route to Specify 2
Transit Network
September 2002
What It Indicates
Incorrect format of transit
network identification.
Required data is missing
from a mandatory
information element.
Device sending this cause
has received a message
that is not permissible while
in the call state.
An unexpected message
was received in a state
other than Null.
Device sending this cause
has received a nonexistent
or not implemented
message type while in the
call state.
Device sending this cause
has received a status
message that indicates an
incompatible call state.
Network is not functioning
correctly, and the condition
is expected to continue.
A call resume has been
issued, but no calls have
been suspended.
No circuit/channel is
currently available to handle
the call.
Network through which call
has been routed does not
serve the destination area
or device.
No causes have been
generated.
User has not been awarded
the incoming call.
The device sending or
receiving this cause does
not recognize the transit
network that the call is
being/ has been routed
through.
What To Do
Contact your service
representative.
Contact your service
representative.
Contact your service
representative.
Retry the call.
Contact your service
representative.
Contact your service
representative.
No action is needed.
Wait and try again.
Contact your service
representative.
No action is needed.
No action is needed.
1. Verify that the network
exists.
2. Verify that the network
serves the device
sending the cause.
9128-A2-GB20-80