Paradyne 9126 User Manual page 222

7. Operation and Maintenance
Table 7-13. DBM Interface Status (2 of 3)
7-40
Field Status
Line Status Call Rejected – ISDN
Link Name: Disabled
(continued)
Link ISDN Link Name
ISDN Link Name
Multilink Constituent
1
Link
Link Operating Mode
Disabled
Idle
Active
Call Status
Not Connected – Invalid
Link Profile
Not Connected
Connected
Connected – Incoming
Call
1
Only appears for a constituent frame relay link.
2
If Link Operating Mode is Disabled or Idle, the Remote Call ID, ISDN Channel, and
Negotiated Rate fields will not appear.
3
Appears for frame relay links with only one constituent and for all constituent frame
relay links.
September 2002
What It Indicates
T
The incoming call was rejected
because the enabled ISDN Link
Name associated with the
incoming Caller1 ID or local
phone number was disabled.
The ISDN Link Name associated
with the incoming call is
displayed.
The selected ISDN backup link for
which status will be displayed.
The selected multilink constituent
link for which status will be
displayed.
The status of the ISDN DBM.
T
2
The ISDN Link Profile is disabled.
T
2
An ISDN link is not currently
needed, so there is no ISDN
connection.
T
The ISDN link is required for
frame relay traffic and needs an
active ISDN connection.
The overall status of the ISDN frame
relay link.
T
No calls are currently connected
on the selected link because the
ISDN Link Profile is incomplete.
T
No calls are currently connected
on the selected link.
T
At least one call is actively
connected and available for data
transfer on the selected ISDN
frame relay link (when the Most
Recent Cause Value is Call
Awarded and Being
Delivered In Est Chnl-7).
T
An incoming call has been
1
answered and is actively
connected and available for data
transfer on the selected multilink
constituent link (when the Most
Recent Cause Value is Call
Awarded and Being
Delivered In Est Chnl-7).
9128-A2-GB20-80