Paradyne 9126 User Manual page 235

Table 7-16. SLV Performance Statistics for Multiplexed DLCI (2 of 3)
9128-A2-GB20-80
Statistic What It Indicates
Inbound Dropped Total number of frames transmitted by the far-end device that
*
Frames were dropped in transit.
The counts continue to increment until the maximum value is
reached (2
The SLV Delivery Ratio option (see
Verification Options,
be enabled for these statistics to appear.
T T
Above CIR*
T T
Within CIR *
T T
Between CIR&EIR *
T T
Above EIR *
Inbound Dropped Total number of bytes transmitted by the far-end device that
Characters * were dropped in transit.
The counts continue to increment until the maximum value is
reached (2
The SLV Delivery Ratio option (see
Verification Options,
be enabled for these statistics to appear. NA appears instead of
a statistical count if FDR/DDR (Frame Delivery Ratio/Data
Delivery Ratio) information is not being received from the
far-end device.
T T
Above CIR *
T T
Within CIR *
T T
Between CIR&EIR *
T T
Above EIR*
* Only appears for FrameSaver units when the SLV Delivery Ratio option is
enabled.
September 2002
32
–2), then the count starts over.
in Chapter 4, Configuration Options ,) must
The number of frames transmitted by the far-end device that
were above the committed information rate and were
dropped in transit.
The number of frames transmitted by the far-end device that
were within the committed information rate, but were dropped
in transit.
The number of frames transmitted by the far-end device that
were between the committed information rate and excess
information rate, and were dropped in transit.
The number of frames transmitted by the far-end device that
were above the excess information rate and were dropped in
transit.
32
–2), then the count starts over.
in Chapter 4, Configuration Options ,) must
The number of bytes transmitted by the far-end device that
were above the committed information rate and were
dropped in transit.
The number of bytes transmitted by the far-end device that
were within the committed information rate, but were dropped
in transit.
The number of bytes transmitted by the far-end device that
were between the committed information rate and excess
information rate, and were dropped in transit.
The number of bytes transmitted by the far-end device that
were above the excess information rate and were dropped in
transit.
7. Operation and Maintenance
Table 4-4, Service Level
Table 4-4, Service Level
7-53