Paradyne 9126 User Manual page 47

Using the Easy Install Feature
The Easy Install feature provides a straight-forward installation menu that requires
minimal configuration to get the FrameSaver unit up and running quickly, and to set
up remote configuration and management via Telnet access from the NOC
(Network Operations Center).
Easy Install Screen Example *
* The Ethernet Management Options Screen applies to the 9126-II (both CSU/DSU
To remotely access the FrameSaver unit in Frame Relay mode, use the Dedicated
Network Management Link that was created during installation, using the Node IP
Address that was entered for the unit.
See the
FrameSaver SLV 9128/9128-II 1-Slot Unit Installation Instructions
FrameSaver SLV 9128/9128-II Network Access Module (NAM) Installation
Instructions
9128-A2-GB20-80
Main Menu Easy Install
main/easy_install
Device Name: Node A
Service Type:
Node IP Address:
Node Subnet Mask:
TS Access:
Create a Dedicated Network Management Link
Ethernet Management Options Screen
Time Slot Assignment Screen
Network 1 Line Framing Format:
Network 1 Line Build Out (LBO):
Network 1 Line Coding Format:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
and Router) and 9128-II. For the Model 9126, DS0 Base Rate (Kbps) appears after
the Network 1 Line Coding Format option.
FrameSaver SLV 9126-II 1-Slot Unit Installation Instructions
for additional information and installation procedures.
September 2002
EASY INSTALL
Frame Relay
000.000.000.000
000.000.000.000
DLCI 980
ESF
0.0
B8ZS
4. Configuration Options
9128-II
08/23/2002 11:04
Clear
Clear
MainMenu Exit
, the
, or the
4-3