Examples Of Operation When Interrupt-Disabled Time Should Be Minimized In Self Programming Mode - NEC 78K0S/KA1+ User Manual

18.8.11 Examples of operation when interrupt-disabled time should be minimized in self programming mode

Examples of operation when the interrupt-disabled time should be minimized in self programming mode are
explained below.
(1) Erasure to blank check
<1> Specification of block erase command (<1> to <5> in 18.8.6)
<2> Mode is shifted from normal mode to self programming mode (<1> to <5> in 18.8.4)
<3> Execution of block erase command → Error check (<6> to <11> in 18.8.6)
<4> Mode is shifted from self programming mode to normal mode (<1> to <5> in 18.8.5)
<5> Specification of block blank check command (<1> to <5> in 18.8.7)
<6> Mode is shifted from normal mode to self programming mode (<1> to <5> in 18.8.4)
<7> Execution of block blank check command → Error check (<6> to <11> in 18.8.7)
<8> Mode is shifted from self programming mode to normal mode (<1> to <5> in 18.8.5)
CHAPTER 18 FLASH MEMORY
User's Manual U16898EJ3V0UD
309