NEC 78K0S/KA1+ User Manual page 314

CHAPTER 18 FLASH MEMORY
(2) Write to internal verify
<1> Specification of source data for write
<2> Specification of byte write command (<1> to <4> in 18.8.8)
<3> Mode is shifted from normal mode to self programming mode (<1> to <5> in 18.8.4)
<4> Execution of byte write command → Error check (<5> to <10> in 18.8.8)
<5> Mode is shifted from self programming mode to normal mode (<1> to <5> in 18.8.5)
<6> <2> to <5> is repeated until all data are written.
<7> The internal verify command is specified (<1> to <5> in 18.8.9)
<8> Mode is shifted from normal mode to self programming mode (<1> to <5> in 18.8.4)
<9> Execution of internal verify command → Error check (<6> to <11> in 18.8.9)
<10> Mode is shifted from self programming mode to normal mode (<1> to <5> in 18.8.5)
314
User's Manual U16898EJ3V0UD