Appendix E Revision History; Major Revisions In This Edition - NEC 78K0S/KA1+ User Manual

E.1 Major Revisions in This Edition
Page
pp. 15, 18, 20 Modification of operating temperature range in CHAPTER 1 OVERVIEW
p. 16 Addition of part number to 1.3 Ordering Information
pp. 21, 22 Addition of Note to P34/RESET, P121/X1, and P122/X2 in 2.1 Pin Function List
p. 23 Addition of description to 2.2.2 P30, P31, and P34 (Port 3)
p. 24 Addition of description to 2.2.4 P121 to P123 (Port 12)
p. 24 Addition of description to 2.2.6 RESET
p. 25 Addition of description to 2.2.7 X1 and X2
p. 41 Modification of description example in 3.4.1 Direct addressing
p. 42 Modification of description and description example in 3.4.2 Short direct addressing
p. 46 Addition of Illustration to 3.4.6 Based addressing
p. 47 Addition of Illustration to 3.4.7 Stack addressing
p. 49 Addition of Note to P34/RESET, P121/X1, and P122/X2 in Table 4-1. Port Functions
pp. 51, 53 Addition of description to and modification of Cautions in 4.2.2 Port 3
p. 58 Modification of Figure 4-10. Block Diagram of P121 and P122
p. 65 Addition of description to (2) In input mode in 4.4.1 Writing to I/O port and 4.4.3 Operations on I/O port
p. 82 Modification of description in (2) External event counter in 6.1 Functions of 16-Bit Timer/Event Counter 00
p. 84 Modification of Caution 2 in Figure 6-2. Format of 16-Bit Timer Counter 00 (TM00)
p. 88 Modification of Caution 2 in Figure 6-5. Format of 16-Bit Timer Mode Control Register 00 (TMC00)
p. 97 Addition of (1) INTTM000 generation timing immediately after operation starts to Figure 6-16. External
Event Counter Operation Timing (with Rising Edge Specified)
pp. 99, 101, 102, 104 Addition of Caution to (1), (2), (3), and (4) in 6.4.3 Pulse width measurement operations
p. 100 Modification of Figure 6-19. Configuration Diagram for Pulse Width Measurement by Free-Running
Counter
Modification of Figure 6-20. Timing of Pulse Width Measurement Operation by Free-Running Counter
p. 100
and One Capture Register (with Both Edges Specified) and Note
p. 102 Modification of Figure 6-22. Timing of Pulse Width Measurement Operation with Free-Running Counter
(with Both Edges Specified) and Note
p. 103 Modification of Note in Figure 6-23. Control Register Settings for Pulse Width Measurement with Free-
Running Counter and Two Capture Registers (with Rising Edge Specified)
p. 104 Modification of Figure 6-24. Timing of Pulse Width Measurement Operation by Free-Running Counter
and Two Capture Registers (with Rising Edge Specified) and Note
Modification of Figure 6-26. Timing of Pulse Width Measurement Operation by Means of Restart (with
p. 105
Rising Edge Specified)
p. 111 6.4.6 One-shot pulse output operation
• Modification of Caution 1 in (1) One-shot pulse output with software trigger
• Modification of Caution in (2) One-shot pulse output with external trigger
p. 116 Modification of <3> and <4> in (2) 16-bit timer counter 00 (TM00) operation of 6.5 Cautions Related to 16-
Bit Timer/Event Counter 00
404

APPENDIX E REVISION HISTORY

Description
User's Manual U16898EJ3V0UD
(1/3)