Safety Precautions; Installation Precautions - GRAPHTEC JS500 User Manual

To ensure the safe and correct use of your prnter, be sure to observe the followng ponts.

■ Installation Precautions

Do not install the printer in the vicinity of volatile solvents such as
alcohol or thinner.
A volatle solvent comng nto contact wth any of the nternal electrcal
●
components may result in a fire hazard or electric shock.
Do not place objects such as those listed below on top of the printer.
Objects such as these comng nto contact wth any of the nternal electrcal
●
components may result in a fire hazard or electric shock.
• Metallc objects such as necklaces
• Objects such as glasses, vases, houseplants, etc. that contan water or
other fluids.
If any of these objects does come nto contact wth the nternal electrcal
components mmedately turn off the power, remove the plug from the power
outlet, and ether contact the store where you purchased your prnter or your
nearest Graphtec representatve.
Do not use the printer in an unstable location such as on a slope or
a location that is subject to a lot of vibration.
Such locatons may cause the prnter to tp over and cause njures.
●
Do not place heavy objects on top of the printer.
Such objects may tp over or fall off, causng njures.
●
If the printer is mounted on its dedicated stand, be sure to use the
caster stoppers to fix the stand in place and prevent it from moving
while the printer is being used.
If the stand is not fixed in place, the printer may tip over and cause injuries.
●

Safety Precautions

WARNING
CAUTION

Prohibited
Don't use
Shock hazard
around water
Prohibited
Prohibited
Prohibited