GRAPHTEC JS500 User Manual page 51

3.5 Detecting the paper width and the position where the paper is set
Setting the paper width detection (Media Detect) function
Ths prnter automatcally detects the paper wdth and the poston where the paper s set. The detected value
is reflected in the Print Position (printing starting position) setting. Set the Media Detect function by using the
followng steps.
(1) Select [5.Applcaton] from the man menu by usng [▲▼] (Up/Down) keys, and press the [ENTER] key.
Menu
Offline
(2) Select [5.Meda Detect] from the sub menu by usng [▲▼] (Up/Down) keys, and press the [ENTER] key.
Menu
Offline
(3) Enable (on) or dsable (off) the Meda Detect functon.
Menu
Offline
Press [▲▼] (Up/Down) keys to toggle between on and off. (Default value: on)
on: Enabled (default settng)
off: Dsabled
(4) Press the [ENTER] key to store the set value. Press the [ESC] key to cancel the set value.
CHECKPOINT
● The immediately preceding set value is enabled as the current set value.
2.Heat Status +
3.CleaningTool +
4.Print Para +
5.Application +
2.PF Heater
3.FH/Pre Heater
4.PH Heater
5.Media Detect
5.Media Detect
on
3-15