GRAPHTEC JS500 User Manual page 54

(3) To change the value, move the cursor by usng [
(up/down) keys.
Menu
Offline
Press the [FUNC] key + [▲▼] poston key to move the Prnthead Carrage to the Prnt Poston to allow
confirmation of the actual printing starting position.
Press any key (other than the [FUNC] key or [ ] poston key) to return the Prnthead Carrage to the Home
Poston.
(4) Press the ENTER key to store the set value.
Press the ESC key to cancel the set value.
CHECKPOINT
● The immediately preceding set value remains as the current set value.
Setting the paper feeding direction
Set the Prnt Poston (prntng startng poston) n the paper feedng drecton by usng the followng steps.
(1) Select [4.Prnt Para] from the man menu by usng [▲▼] (Up/Down) keys, and press the [ENTER] key.
Menu
Offline
(2) Select [1.Prnt Post.] from the sub menu by usng [▲▼] (Up/Down) keys, and press the [ENTER] key.
Menu
Offline
1.Print Post.
Start: 0100 mm
Length: 0000 mm
1.Ink Status +
2.Heat Status +
3.CleaningTool +
4.Print Para +
1.Print Post. -
2.Bi-dir.Adj. -
3.Print Speed -
4.Feed Speed -
] (left/rght) keys, and change the value by usng [▲▼]
3-18