GRAPHTEC JS500 User Manual page 116

5. Check that the Ink Install Jg s not attached, move the Prnthead Carrage to the Cappng Staton and cap t.
6. Select [3.Cleanng Tool] from the man menu by usng [▲▼] (Up/Down) keys, and press the [ENTER] key.
Menu 1.Ink Status
2.Heat Status
3.CleaningTool
Offline 4.Print Para
Select [7.Parkng] from the sub menu by usng [▲▼] (Up/Down) keys, and press the [ENTER] key.
Menu 4.Home Post.
5.Clean
6.Clean(Heavy)
Offline 7.Parking
7. Turn off the power.
CAUTION
● After long-term storage, the mixture of air into the outlet tubes and inlet tubes may
occur due to gradual volatilization of the Ink Cleaning Solution in the printheads. Be
sure to check the outlet tubes and inlet tubes at least once a week. If a significant
amount of air is found, set the Ink Install Jig, and remove air with an injector.
+
+
+
+
-
-
-
-
9-10