GRAPHTEC JS500 User Manual page 10

■ Maintenance and Inspection Precautions
Be sure to turn off the power and remove the power plug from the
power outlet before performing any cleaning operations.
Failure to do so may result in a fire hazard or electric shock. Moreover, there
●
s a rsk of njury f the prnter starts to move durng a cleanng operaton.
To clean the printer, use a cloth that has been dampened with
neutral detergent and then well wrung out. Do not use volatile
solvents such as alcohol, benzene or thinner to clean the printer.
A volatle solvent comng nto contact wth any of the nternal electrcal
●
components may result in a fire hazard or electric shock.
Do not apply any lubricant to mechanical sections of this printer.
Ths may deterorate the performance of ths prnter whch may lead to
●
malfuncton or falure.
Subsequent short circuits or heat generation may result in a fire or an electric
●
shock.
At least once a year, remove the power plug from the power outlet and clean the prongs and
surrounding areas.
A build-up of dust may result in a fire hazard.
●
When cleaning or checking the inside of the printer, make sure that a metallic object such as
a necklace or bracelet does not come into contact with any of the internal components.
Such actons may result n njures or an electrc shock.
●
When removing paper that is jammed inside the printer, take care not to get ink from the
paper on your clothing or hands.
Ink may adhere to your clothng or hands.
●
When replacing roll paper, loading paper, or removing paper that has become jammed in the
printer, take care not to cut yourself on the edges of the paper.
● Sharp paper edges may cause njures.
WARNING
CAUTION
v
Prohibited
Prohibited