TMe To Lpm (Low Power Mode) - GRAPHTEC JS500 User Manual

Man Menu
6. Flash Mode
5. Applcaton 1. Tme to LPM
2. FH and Pre
Sub Menu
Set the Flash Mode (the mode whch performs empty ejectons durng
prntng).
Menu
Offline
To change the value, move the cursor by usng [
and change the value by usng [▲▼] (up/down) keys.
Settng range: 0000 - 0300 (Default value: 0001)
When the settng s "0000", empty ejectons are not performed durng
prntng. When the settng s 0001 - 0300, empty ejectons are performed
at the Home Poston accordng to the set value for the number of
passes.
See "6.5.1 Flash Mode" descrbed later for detals about settngs.
Press the [ENTER] key to store the set value.
Press the [ESC] key to cancel the set value. (The mmedately precedng
set value remans as the current set value.)
Set the tme nterval (mn) to move to the LOW power mode when the
prnter s n the standby mode.
Menu
Offline
To change the value, move the cursor by usng [
and change the value by usng [▲▼] (up/down) keys.
Settng range: 0000 - 1999 (Default value: 0060)
See "7.5 Tme to LPM (Low Power Mode)" descrbed later for detals
about the LOW power mode.
Set the temperature (°C) for the Front Heater and Pre Heater.
Menu
Offline
To change the value by usng [▲▼] (up/down) keys.
Settng range: 0000 - 0099 (Default value: 0045)
Press the [ENTER] key to store the set value.
Press the [ESC] key to cancel the set value. (The mmedately precedng
set value remans as the current set value.)
If a value of 60°C or over is specified, a protection circuit works, and the
temperature does not move exceedng 60°C.
4-7
Functon descrpton
6.Flash Mode
0001
Flash only
0000 - 0009 : Flash only
0010 - 0300 : Auto clean
1.Time to LPM
0001
2.FH and Pre
0045
] (left/rght) keys,
] (left/rght) keys,