Table of Contents
Advertisement
3. Settng the Prnt Mode
There are five Print Modes.
Select accordng to your purpose and status of use.
• Test Mode (1Pass)
• 360×360 dp (2Pass)
• 360×720 dp (4Pass)
• 720×720 dp (8Pass)
• 720×1080 dp (12Pass)
• 720×1440 dp (16Pass)
4. Settng the Drecton
Select the undrectonal or bdrectonal prntng.
Check the check box to select the bdrectonal or uncheck to select the undrectonal prntng.
5. Settng the Meda
• Ths functon allows regstraton of meda types.
Use ths functon to use meda whch are made of varous materals or wth dfferent thcknesses.
• Values of the "Feed Compensaton" n the "Important Setup" can be adjusted for each meda and can be
stored n the memory.
• Settngs other than the "Feed Compensaton" are common to all the meda.
• To set the name of the meda, select Add Meda to hghlght the characters. Input the name of the new
meda, and press the Enter key.
• Up to five types can be inputted.
• Up to 19 sngle-byte characters can be nputted.
• To delete the meda, clck the desred meda to hghlght the name, and press the Delete key.
5-6
Advertisement
Table of Contents
