TurnNg The Heater On; TurnNg The Heater Off - GRAPHTEC JS500 User Manual

Turning the heater On
CAUTION When the power of the printer is off, the heater cannot be turned on by turning on the
●
Heater Switch.
Be sure to set the temperature of the heater on the Control Panel before turning on the
●
heater. See "Chapter 7 Setting the heater" for setting the temperature of the heater.
Press the ON sde of the Heater Swtch. The prnter s turned on and the temperature ncreases to the set
value.
Turning the heater Off
Press the OFF sde of the Heater Protectve Swtch.
Heater Switch
Heater Switch
2-3
Heater Switch
Press here
(ON)
Heater Switch
Press here
(OFF)