Processor (Cpu); Installation; Setting Required After Installation - NEC express5800 A2010b User Manual

Chapter 2 Preparations
1.12

Processor (CPU)

Your server can have up to four processors.

1.12.1 Installation

Ask your service representative who is authorized by NEC to install the component. The service representative
will install the component, and transfer the server to you after making sure that the server can operate normally.

1.12.2 Setting Required after installation

Run BIOS Setup Utility (SETUP) to confirm the settings related to CPU. Refer to Chapter 2 (1. System BIOS) in
"Maintenance Guide".
Advanced → Processor Configuration → Processor Information
– CPU ID
– L2 Cache RAM
– L3 Cache RAM
188
Important Make sure to use the processor authorized by NEC. Installing a third-party processor
may cause a failure of the processor as well as the motherboard. Repair of the
server due to failures or damage resulted from installing such a processor will be
charged.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
1. Installing / Removing Internal Options