NEC express5800 A2010b User Manual page 246

Chapter 2 Preparations
4. Secure the handle of power supply unit and power cable with repeat tie. Fasten the cable tie so that it
firmly engages with boundary between the power cable connector and cable harness.
Handle of power supply unit
5. Turn the AC power on.
a) If PDU (Power Distribution Unit) is used, turn on the switch of PDU.
b) If UPS (Uninterruptible Power Supply) is used, turn on UPS.
Other than above, turn on the breaker of AC power supply, it it is off.
6. Make sure that Power Unit LED blinks green.
246
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
Repeat tie
Confirm that the cable tie is firmly engaged with this
portion so that the power cable would not be
disconnected.
2. Installation and Connection