Chapter 3 Setup
8.14.2 Set Online/Offline
This command allows you to acquire states of PCIe card and memory module (MR), connect PCIe card or
memory module dynamically, and disconnect PCIe card from the server dynamically.
Syntax
oemneccomponent -get/-set <online/offline> [-dev_type <pci/mr> -dev_num <1-16(pci)/1-8(mr)>]
Parameter
get offline/online: Shows state of devices that can be dynamically connected or disconnected.
> oemneconline -get
PCI15
PCI16
MR7
MR8
set online:
dev_type [pci/mr]:
dev_num [1-16(pci)/1-8(mr)]: Specify device number.
set offline:
dev_type [pci]:
dev_num [1-16]:
Important
Offline
Offline
Offline
Offline
Connect the specified device to server dynamically.
Specify device type.
Disconnect the specified device from server dynamically.
Specify the spare device type.
Specify the spare device number.
•
The operations must be performed only while the server is powered on.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
8. SMASH-CLP
435