NEC express5800 A2010b User Manual page 349

Chapter 3 Setup
(3) Alert
Overview
The server provides two alert features; mail alert and SNMP alert. The following describes settings items for
these features.
(a) Email alert
Use this page to view and edit configuration of Email alert sent from BMC. Up to 6 destinations can be
registered.
You need to configure [Destination] to specify the receiver, and [SMTP Server] to send mail Administrator
privilege is required to use this feature.
To specify destination, select [Configuration] tab, and select [Alert] – [Mail Alert] – [Destination] from the tree
in left pane. You can view or modify the current setting.
Item
Alert
Address
Operation
Alert Test
Shows Enabled or Disabled.
Shows destination address.
Displays buttons for operation.
Administrator privilege is required to use this feature.
Pressing the [Alert Test] button sends pseudo event to the specified destination.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
7. Using Remote Management

  
Description

349