NEC express5800 A2010b User Manual page 367

Chapter 3 Setup
Item name
SEL Behavior when
SEL repository
is full (*2)
Interface
Access Log
(*4)
HTTP
HTTPS
SSH
AC-LINK(*5)
Power
Option
Delay Time
(sec)(*6)
PEF (*7) Platform Event
Filtering
Description
Specify the logging
method of new
event log (SEL)
when SEL
repository is full.
Specify an event to
be registered in
Access Log.
Specify the DC
power mode when
AC power is off.
Specify the delay
time from AC ON
to server power on
(in seconds).
Setting of delay
time can be
changed when
[Last State] or
[Power On] is
selected for
[AC-LINK].
Enable or disable
SNMP Alert (PEF).
When set to
Disable, SNMP
alert is not sent.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
Setup value
Stop logging SEL (*3)
New event is not logged when
SEL repository is full. This
setting can be used on the
server where NEC ESMPRO
Agent is installed. NEC
ESMPRO Agent takes up SEL,
and then clears SEL. If NEC
ESMPRO Agent is not installed,
new event log cannot be
collected.
Clear All SEL
All the event logs are cleared
when SEL repository becomes
full.
Overwrite oldest SEL
The oldest log is overwritten by
new log when SEL repository is
full.
Enable/Disable
Enable/Disable
Enable/Disable
Enable/Disable
Stay Off
Does not turn DC power on.
Last State
Restore the DC state before
AC-Off.
Power On
DC power is always turned on.
45 to 600
Select Random of Manual
Setting to specify delay time.
Manual Setting: Select this item
to set delay time manually.
Available values are between 45
and 600 seconds.
Random:
BMC sets random value in the
range between 45 and 600
seconds.
Enable/Disable
7. Using Remote Management
Default setting(*1)
Stop logging SEL
Disable
Disable
Disable
Disable
Last State
45
Enable
367