NEC express5800 A2010b User Manual page 483

Chapter 4 Appendix
Security Related (Others)
Security menu
Operation mode
Password on Boot
Disable USB Ports
Remote KM and
VMedia
Server Related
Server menu
Operation mode
POST Monitoring
Boot Monitoring
OpROM Monitoring
Parameter
([ ]: Default setting)
[Disabled]
Enabled
[Disabled]
Front
Rear
Internal
Front+ Rear
Front+ Internal
Rear+ Internal
Front + Rear + Internal
Disabled
[Enabled]
Parameter
([ ]: Default setting)
Disabled
[Enabled]
[Disabled]
Enabled
1- 60 minutes
(Default: [1] minute)
[Disabled]
Enabled
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
When
applied
At next boot Enable or disable the feature to request
password entry on boot. This item is accessible
when Administorator Password has been set.
Disabled: Disables the feature.
Enabled: Enables the feature.
At next boot Specify the USB port to be disabled.
If internal USB port is disabled, Internal Flash
Memory cannot be used.
Disabled: All the USB ports are available.
Front: The USB port at front of chassis cannot be
used.
Rear: The USB port at rear of chassis cannot be
used.
Internal: The internal USB port cannot be used.
Front + Rear: The USB ports at front and rear of
chassis cannot be used.
Front + Internal: The USB port at front of chassis
and the internal USB port cannot be used.
Rear + Internal: The USB port at rear of chassis
and the internal USB port cannot be used.
Front + Rear + Internal: All the USB ports are
unavailable.
At next boot Enable or disable remote keyboard, remote
mouse, and virtual media feature that BMC
supports.
Disabled: Disables the feature.
Enabled: Enables the feature.
When
applied
At next boot Monitors POST execution to complete. If timeout
error occurs, turn off DC power of the server.
Disabled: Does not monitor POST execution time
to complete.
Enabled: Monitors POST execution time to
complete.
At next boot Enable or disable the boot monitoring feature.
Use this feature on the OS environment where
NEC ESMPRO Agent is installed.
Set to [Disabled] if NEC ESMPRO Agent is not
installed.
At next boot Enable or disable timeout monitoring feature of
OpROM stall.
Disabled: Disables the feature.
Enabled: Enables the feature.
2. Operation Mode
Description
Description
483